|
Fountek NeoCD3.0 ribbon tweeter
110mm (4.33") Round Metal Flange, Black, Depth is 68mm (2.7")
Super strong Neodymium magnets
Build-in impedance conversion transformer
Effective from 1,400Hz upwards due to the large diaphragm area and low self-resonance.
Thin enforced sandwich ribbon diaphragm guarantees a high degree of signal fidelity and broad frequency response.
Low distortion factor, good power-handling capabilities, high linear impedance and amplitude frequency response and the broad frequency response range.
Flat impedance from 1,000 to 40,000Hz
Factory matched pairs: Although these are sold each, when you order two you will receive a matched pair.
Specifications
Ribbon material: Enforced sandwich
Ribbon mass: 18mg
Ribbon dimension: 8mmX60mmX0.02mm
Ribbon area: 480square millimeters
Gap flux: 0.6 Tesla
Gap height: 3mm
Impedance: 7 Ohm
DCR: 0.02 ohm
Sensitivity: 95dB/M/W
Frequency response: 1,400~40,000Hz
Resonance frequency: 400Hz
Power handling: 17W Normal, 40W Max
Recommended crossover frequency: 2,500Hz / 2nd-Order
Warning:
Ribbon tweeters should always be used with a passive crossover!
Do not test without a capacitor.
Tweeters are repairable at Madisound for a very reasonable price. Call us to make arrangements.
|
