layout Madisound Logo
  Madisound StoreNews BlogSitemapAudio ForumContact InfoHome

Madisound Specials

New products

Reviews

Components

Loudspeakers
   Tweeters
   Midranges
   Fullranges
   Woofers
   Subwoofers
   Auto Sound
   Coaxial
   In-Wall
   Pro Sound
   Repair Parts

Speaker Kits

Catalog

Cabinets

Amplifiers

Store home

Sitemap

Compare
   Capacitors
   Inductors
   Speaker Kits
   Manufacturers
   Resistors

Click to verify BBB accreditation and to see a BBB report.

   

Tymphany LAT500 8/8 ohm (4 ohm in parallel)

Quantity:

Tymphany LAT500 8/8 ohm (4 ohm in parallel)

 $337.15  $189.00 
4+ $189.00
10+ $189.00

Madisound# LAT500-8/8

  View Product PDF (206 KB)

Bookmark and Share

Tymphany LAT500 8/8 ohm sobwoofer

The power of two 10" subwoofers in a sleek tube-shaped transducer. 

Specifications calculated with both coils driven in parallel for a 4 ohm load.

Can be used stereo as 8/8 ohm, in parallel as a mono 4 ohm or in series for mono 16 ohm.

Dimensions:
7" wide x 16" long
3" depth
2.9" height

Nominal Impedance 4 Ohm  (8/8 ohm)
Free Air Resonance 28 Hz
DC Resistance (Re) 3.2 Ohm Sensitivity (2.83V/1m) 92 dB
Voice Coil Inductance (Le) 1.5 mH Mechanical Q-factor (Qms) 9
Effective Piston Area (Sd) 525 cm2 Electrical Q-factor (Qes) 0.5
Voice Coil Diameter 38 mm Total Q-factor (Qts) 0.45
Voice Coil Height 21.3 mm Moving Mass incl. air (Md) 160 g
Air Gap Height 8 mm Force Factor (BL) 13 Tm
Linear Coil Travel (peak) 6.7 mm Equivalent Volume (Vas) 81 Liters
Magnet Gap Flux Density - T Compliance (Cms) 0.21 mm/N
Magnet Weight 2.72 Kg Mechanical Loss (Rm) 3 kg/s
Net Weight - Kg Rated Power Handling 250 Watt

Suggested alignments:

Vented box of 2.5 cubic feet with a 3" diameter vent by 7" long.  F3 of 30Hz.

Sealed box of 0.9 cubic feet.  F3 of 50Hz.  In car response with 6dB cabin gain, F3 of 30Hz.

Bandpass box:
  Vented chamber 0.9 cubic feet with 4" diameter vent by 9" long
  Sealed chamber of 1.2 cubic feet
-3dB roll off frequencies of 30Hz and 100Hz - No crossover needed




For more information, please visit the brand overview.
Write your own
 review on this product
Submited By: Scott Philiben on 11/03/2009
I bought this unit as the concept was appealing apposed driver pairs

The space for my subwoofer was in a cabinet above the bed headboard- this was for a Bedroom Suite Home theater

Not an Ideal location but the surround sound has to work in two locations (bed and seating area) - good compromise _ I paired this unit to the Kiega 200 Watt amp and I can definitely feel the bass


Dialing the unit in now and damping the cabinet walls as it definately shakes the walls when the subwoofer volume is high - but only during very loud "noise" passages The Dark Knight opening shot is one example but the rest of the movie was fine. More fine tuning of the room balance

I will use this unit again as it is easy to find suitable space for the unit much easier than a round transducer and it looks good
Displaying 1 of 1 product reviews
Shopping Cart more
0 items
Tell A Friend
 
Tell someone you know about this product.
Product Reviews more
Tymphany LAT500 8/8 ohm (4 ohm in parallel)
I bought this unit as the concept was appealing apposed driv ..
Rating: 4 of 5 Stars!
Notifications more
Click to RECEIVE
 Product Notifications on this itemEmail me about status updates for Tymphany LAT500 8/8 ohm (4 ohm in parallel)
Manufacturers

Madisound's
PayPal Process

Solution Graphics



Madisound Newsletter