Madisound was established in 1972, and we accumulated an enormous library of raw loudspeaker driver specification sheets. In 201,7, we created the Madisound PDF Library to collect these PDFs in one easy-to-search location.
In addition to loudspeaker driver specification sheets, we are uploading PDFs of publications by and about speaker brands, cabinet enclosure plans, and free passive crossover designs.
Need assistance? Try the search box first, but if you can’t find what you’re looking for here, don’t hesitate to contact Madisound Speaker Components. Madisound provides speaker design assistance and speaker replacement suggestions with each sale.
From the Library
H1571 + T25CF001 Passive Crossover Design
Passive Crossover Design for H1571 + T25CF001 Crossover Design for Seas H1571 woofer and T25CF001 tweeter No box alignment specified. Additional Notes: Crossover point about 2.0 kHz. Nominal output ~ 87-88 dB. Clean design with low parts count and single hi-pass cap. Some padding in hi-pass circuit.
C153-8-085 x2 + 70-10D MTM Passive Crossover Design
C153-8-085 x2 and 70-10D Passive Crossover Design Crossover Design for Accuton C153-8-085 x2 in parallel and Raal 70-10D ribbon tweeter, MTM configuration No designated box alignment. Additional Notes: Clean design with low parts count and single small-value hi-pass cap. Minimal padding in hi-pass circuit.
26W-8861T +18W-8531G + D2905-9900 3way Passive Crossover Design
Passive Crossover Design for 26W8861T + 18W8531G + D29059900 3way crossover design for Scanspeak 26W/8861T 10″ Revelator, 18W/8531G 7″ Midwoofer and the D2905-9900 Tweeter Anechoic design (flat response) Woofer: 2.5 cubic foot, single straight vent 3″ x 3″ length. Midrange: 0.25 cu. ft. sealed Additional Notes: Crossover points about 300 Hz and 3.8 kHz. Nominal output ~ 87-88
Madisound stocks these brands and more.
