• 608-831-3433
  • info@madisoud.com

Madisound's Loudspeaker Reference Library

26W-8861T +18W-8531G + D2905-9900 3way Passive Crossover Design

Passive Crossover Design for 26W8861T + 18W8531G + D29059900

3way crossover design for Scanspeak 26W/8861T 10″ Revelator, 18W/8531G 7″  Midwoofer and the D2905-9900 Tweeter

Anechoic design (flat response)

Woofer: 2.5 cubic foot, single straight vent 3″ x 3″ length.

Midrange: 0.25 cu. ft. sealed

Additional Notes: Crossover points about 300 Hz and 3.8 kHz. Nominal output ~ 87-88 dB. Two large value hi-pass caps. Significant padding in hi-pass circuit. -0- resistor value indicates optional padding to taste.  Note the woofer is in reverse polarity relative to the mid and tweeter.

 

  • Crossover Design, Scan-Speak

H1208 + H1262 + H1189 3-way Passive Crossover Design

H1208 + H1262 + H1189 3-way Passive Crossover Design Note: Tweeter and midrange in reverse polarity to woofer. Small high pass cap, but large value midrange cap. High-order network. Woofer in 1.0 cf3 tuned with a 2″ x 4″ straight port. Midrange in 0.1 cf3 sealed.

Read More »
September 20, 2019 No Comments

SB29NRX75-6 + SB12NRXF25-4 + SB29RDC-COOO-4 3-way Passive Crossover Design

SB29NRX75-6 + SB12NRXF25-4 + SB29RDC-COOO-4 3-way Passive Crossover Design SB Acoustics SB29NRX75-6 + SB12NRXF25-4 + SB29RDC-COOO-4 3-way Passive Crossover Design Crossover points at about 300 Hz and 2500 Hz. Woofer alignment: 1.8 cubic foot vented with a single vent 3″ x 8″. Midrange: 0.2 cubic foot sealed. Tweeter and midrange in reverse polarity relative to

Read More »
February 21, 2019 No Comments

SB29RNX75+ H1571 + H1212 3way Passive Crossover Design

SB29RNX75+ H1571 + H1212 3way Passive Crossover Design SB29RNX75+ H1571 + H1212 3way Passive Crossover Design Notes: 3way Passive Design with 10″ SB woofer. Crossover points at ~300 Hz and ~2.6kHz. Clean network with one series high-pass and one mid-pass cap. Woofer alignment: 2.1 cubic foot vented, single vent 3″ x 6″ Midrange: 0.25 cf

Read More »
October 12, 2018 No Comments

W17RC38+ TN25 Passive Crossover Design

W17RC38+ TN25 Passive Crossover Design Silver Flute W17RC38+ Hi-Vi TN25 Passive Crossover Design Incredibly simple design with only six components. Very basic pad on tweeter. Good budget 2way.

Read More »
August 9, 2018 No Comments